COLORAMA
These are the sales outlets of Knuchel Farben AG throughout Switzerland. Here you can find out more about the range of services and opening hours.
Eclatin
Subsidiary specialized in high quality painting and coating systems for industry, steel and hydraulic engineering as well as in many special fields.
RUBApaint
Knuchel Farben AG's well-known brand for building protection products. Serves as a secondary brand, where an independent appearance should be possible.
3
Floor paints and coatings

3.1    Painting systems

513 BLENDA®-SOL
methacryl PU floor paint
BLENDA®-SOL is a water-dilutable and low-odour methyl acrylic polyurethane floor paint. The result is abrasion-resistant, elastic and non-yellowing coatings. The coating has a good resistance to water, detergents and cleaning agents, etc. BLENDA®-SOL is only conditionally suitable in contact with organic solvents, petrol, diluted acids and alkalis. For such uses we recommend to use BLENDA®-POX 512. For increased demands and for outdoor applications, BLENDA®-SOL is cross-linked with a special hardener, which further improves the mechanical and chemical resistance.
Further information
13 DUROSOL
cement floor paint
DUROSOL is a solvent-containing, viscoplastic 1-component floor paint based on an epoxyester. It produces a dirt-resistant, filling, shock and impact resistant seal with high abrasion resistance. Resistance to water, detergents and cleaning agents, mineral oils, etc. is excellent. Diluted acids and alkalis, however, cause swelling, discolouration and finally destruction of the paint if exposed for a longer period of time. Organic solvents dissolve the film within a short time. For heavily used floors in warehouses, commercial enterprises, etc. we recommend a 2-component system such as BLENDA®-POX 512, DUROPON 319 or EPOLUX 14.
Further information
512 BLENDA®-POX
2K epoxy paint
BLENDA®-POX is a cold-curing 2-component epoxy paint which contains water instead of solvent. BLENDA®-POX meets the highest standards of hygiene, durability and abrasion resistance and offers excellent resistance to a wide range of chemicals, mineral oils, fuels, diluted acids and alkalis, lime solutions, etc. BLENDA®-POX is non-flammable, low-odour and pleasant to work with.
Further information
531 BLENDA®-POX
2K epoxy paint «ECO»
BLENDA®-POX is a cold-curing 2-component epoxy paint which contains water instead of solvent. BLENDA®-POX meets the highest standards of hygiene, durability and abrasion resistance and offers excellent resistance to a wide range of chemicals, mineral oils, fuels, diluted acids and alkalis, lime solutions, etc. Concentrated acids, however, cause swelling, discolouration and ultimately destruction of the coating if exposed to them for a long time. BLENDA®-POX is non-flammable, low-odour and pleasant to work with.
Further information
537 BLENDA®-FLOR
2K-PU floor paint WV-537
BLENDA®-FLOR is a water-dilutable, low-odour 2-component floor paint based on polyurethane acrylate resin. The result is an extremely tough-elastic, wear-resistant and non-yellowing coating with very high weather and light resistance. BLENDA®-FLOR has an extremely good abrasion resistance and the resistance to water, alcohol and household chemicals is excellent.
Further information
212 BLENDA®-FLEX
2K-PU elasto-lacquer WV-212
BLENDA®-FLEX is an aqueous, flexible and permanently elastic 2-component coating based on polyurethane. A special plasticizer barrier, thanks to state-of-the-art PU technology, makes it possible to protect various flexible plastics efficiently and economically. BLENDA®-FLEX has excellent direct adhesion, is block resistant and results in abrasion and wear resistant coatings with excellent light and weather resistance.
Further information
14 EPOLUX
2-component epoxy paint EP-14
EPOLUX 2-component epoxy paint EP-14 is a solvent-containing, viscoplastic 2-component paint on epoxy resin basis with very high impact, shock and abrasion resistance. EPOLUX meets the highest standards of hygiene, durability and abrasion resistance and offers excellent resistance to a wide range of chemicals, mineral oils, fuels, diluted acids and alkalis, lime solutions, etc.
Further information
319 DUROPON
2K-PUR floor paint DS DD-319 silk matt
DUROPON is a chemically curing 2-component coating based on acrylic polyurethane (DD). DUROPON produces hardwearing surfaces with good resistance to a wide range of oils, solvents, various chemicals, cleaning agents, etc. The coatings are characterised by good light fastness and chalking resistance as well as mechanical resistance.
Further information
369 DUROPON
2K-PU floor paint DD-369 silky gloss
DUROPON is a chemically curing 2-component coating based on acrylic polyurethane (DD). DUROPON produces hardwearing surfaces with good resistance to a wide range of oils, solvents, various chemicals, cleaning agents, etc. The coatings are characterised by good light fastness and chalking resistance as well as mechanical resistance.
Further information
325 DUROSAFE
slip stop FH-9000
DUROSAFE is a moisture-curing 1-component polyurethane resin coating with an anti-slip surface structure. After application, the entry of air humidity causes cross-linking, which leads to an extremely adhesive, tough-elastic and abrasion-resistant protective coating. DUROSAFE prevents any penetration of moisture, is enormously resistant to mechanical damage and has an exceptionally good tread resistance (slip class R12) with sound-absorbing effect. Thanks to its excellent adhesion properties, DUROSAFE can be applied to practically all substrates. The coatings are non-yellowing, have a good UV and weather resistance and show excellent resistance to cleaning agents, diluted acids, lye, etc.
Further information
118 DUROSAFE
colour tone concentrate FH
Colour concentrate for colouring DUROSAFE Slip Stop FH-9000.
Further information
2112 COROPUR NonAbrasive
2K-FH finishing coating RHK 11
COROPUR NonAbrasive 2K-FH finishing coating RHK 11 is a moisture-curing 1-component polyurethane resin coating with an anti-slip surface structure. The system is equipped with fillers, which give the surface an appropriate roughness, which leads to the anti-slip properties.
The coating achieves a coefficient of friction µ > 0.45 according to DIN 51151. This results in the rating GS3 in the footwear area and GB2 in the barefoot area. According to the «Assessment of slip hazards under operating conditions» published by the German Social Accident Insurance, the coating achieves the highest rating of «safe, falls unlikely». The resulting anti-slip properties depend on the nature of the substrate and the application quantity.
COROPUR NonAbrasive 2K-FH finishing coating RHK 11 is particularly characterized by high abrasion resistance and chemical resistance. The light and weather resistance is good even in high sunlight.
Further information
2123 COROPUR NonAbrasive
2K-FH finishing coating RHK 12/13
COROPUR NonAbrasive 2K-FH finishing coating RHK 12/13 is a moisture-curing 1-component polyurethane resin coating with an anti-slip surface structure. The system is equipped with fillers, which give the surface an appropriate roughness, which leads to the anti-slip properties.
The coating achieves a coefficient of friction µ > 0.60 according to DIN 51151. This results in the rating GS4 in the footwear area and GB3 in the barefoot area. According to the «Assessment of slip hazards under operating conditions» published by the German Social Accident Insurance, the coating achieves the highest rating of «safe, falls unlikely». The resulting anti-slip properties depend on the nature of the substrate and the application quantity.
COROPUR NonAbrasive 2K-FH finishing coating RHK 12/13 is particularly characterized by high abrasion resistance and chemical resistance. The light and weather resistance is good even in high sunlight.
Further information
534 BLENDA®-POX AS
2K epoxy lacquer antistatic WV-534
BLENDA®-POX AS is an air-drying, cold-curing 2-component paint on an epoxy resin basis. BLENDA®-POX AS meets the highest standards of hygiene, durability and abrasion resistance and offers excellent resistance to a wide range of chemicals, mineral oils, fuels, diluted acids and alkalis, lime solutions, etc. BLENDA®-POX AS is non-flammable, low-odour and pleasant to work with.
Further information
546 BLENDA-FLOR AS
2K-PU sealing ink antistatic WV-546
BLENDA-FLOR AS is a water-dilutable, low-odour 2-component floor paint based on polyurethane acrylate resin. The result is an extremely tough-elastic, wear-resistant and non-yellowing coating with very high weather and light resistance. BLENDA-FLOR AS has an extremely good abrasion resistance and the resistance to water, alcohol and household chemicals is excellent.
Further information
4590 3M
copper strip
Copper tape with conductive acrylic adhesive to dissipate static electricity. Solvent resistant acrylic adhesive.
Further information

3.2    Coating Systems

519 BLENDA®-DIT
2K epoxy coating
BLENDA®-DIT is a water-dilutable self-leveling 2-component coating on epoxy resin basis. This results in hard-wearing coatings that meet high standards of hygiene and resistance to a wide range of chemicals. With BLENDA®-DIT, layer thicknesses from 2mm are applied in one operation. The coated underlays have a very high vapour permeability and a hard-wearing, ceramic-like surface. BLENDA®-DIT is especially suitable for decorative residential construction, as well as for floor areas without basement (rising damp by capillary action).
Further information
345 EPODIT
2K epoxy coating EP-345
EPODIT is a solvent-free and self-leveling 2-component coating based on epoxy resin. Pore-free and liquid-tight coatings can be realized, which have to meet the highest demands on hygiene and resistance to a variety of chemicals, petrol, mineral oils, diluted acids and alkalis, etc. EPODIT produces tough elastic coatings with high impact, shock and abrasion resistance and layer thicknesses from 1500 µm are achieved.
Further information
340 EPODIT
2K epoxy coating EP-340
EPODIT is a solvent-free and self-leveling 2-component coating based on epoxy resin. Pore-free and liquid-tight coatings can be realized, which have to meet the highest demands on hygiene and resistance to a variety of chemicals, petrol, mineral oils, diluted acids and alkalis, etc. EPODIT produces tough elastic coatings with high impact, shock and abrasion resistance and layer thicknesses from 1500 µm are achieved.
Further information
49 DURODIT
2K-PUR coating DD-49
DURODIT is a solvent-free and self-leveling 2-component coating based on polyurethane resin. It produces non-porous, crack-bridging and liquid-tight coatings from 1mm, which have very good impact, shock and abrasion resistance.
Further information
348 DURODUR
2K-PAC coating
DURODUR is a solvent-free and self-leveling 2-component coating based on polyaspartic acid ester with very high impact, shock and abrasion resistance. DURODUR coatings have excellent adhesion, are non-yellowing, extremely weatherproof and show very good gloss retention, lightfastness and chalking resistance.
DURODUR meets the highest standards of hygiene, durability and abrasion resistance and offers excellent resistance to a wide range of chemicals, mineral oils, fuels, diluted acids and alkalis, lime solutions, etc.
Further information
383 DUROSTONE
2K-PUR natural stone binder
DUROSTONE is a 2-component natural stone binder based on polyurethane resin and is used as a binder for sprinkling CREASTONE Deco Quartz. It meets the highest requirements in terms of chemical and mechanical resistance. The stone carpets have excellent adhesion, are non-yellowing, extremely weatherproof and show very good gloss retention, lightfastness and chalking resistance.
Further information
385 DUROSTONE
1K-PUR natural stone binder
DUROSTONE is a solvent-free, unpigmented and moisture-curing 1-component PUR stone binder based on modified isocyanate prepolymers. The mixture DUROSTONE 1K-PUR natural stone binder and CREASTONE Deco Quartz results in abrasion-resistant, lightfast and extremely decorative stone carpets with excellent processing properties. These functional coatings are breathable, extremely weather-resistant and non-yellowing. Suitable for the embedding material are pebble decorative quartzes in dimensions of 2 to 4mm. Not suitable are quartz fragments and marble granules. The use of DUROSTONE as a binder for sprinkling is not recommended, as foam bubbles may form.
Further information

3.3    Sealants

321 BLENDA®-FIS
PU sealer WV-321
BLENDA®-FIS is a water-dilutable, low-odor sealing varnish based on polyurethane acrylate resin. This results in extremely tough-elastic, wear-resistant and non-yellowing seals. BLENDA®-FIS has a very high abrasion resistance and the resistance to water, alcohol and household chemicals is excellent. For increased demands and for outdoor applications, BLENDA®-FIS is cross-linked with a special hardener, which further improves the mechanical and chemical resistance.
Further information
311 BLENDA®-FLOR
2K-PU sealer WV-311
BLENDA®-FLOR is a water-dilutable, low-odour 2-component sealing varnish based on polyurethane acrylate resin. The result is an extremely tough-elastic, wear-resistant and non-yellowing sealant with very high weather and light resistance. BLENDA®-FLOR has an extremely good abrasion resistance and the resistance to water, alcohol and household chemicals is excellent.
Further information
312 BLENDA®-DUR
2K-PU sealer X-matt WV-312
BLENDA®-DUR is a water-dilutable, low-odour 2-component sealing varnish based on polyurethane acrylate resin. The result is an extremely tough-elastic, wear-resistant and non-yellowing sealant with very high weather and light resistance. BLENDA®-DUR has an extremely good abrasion resistance and the resistance to water, alcohol and household chemicals is excellent.
Further information
322 DUROPUR
1K-PUR sealer FH-5000
DUROPUR is a moisture-curing 1-component sealant based on polyurethane resin. The access of air humidity during application creates compounds with which the polyurethane resin can cross-link. The property profile of DUROPUR is comparable with a 2-component DD sealing lacquer. It meets the highest requirements in terms of chemical and mechanical resistance. DUROPUR produces hard, abrasion-resistant yet elastic coatings with excellent resistance to solvents, petrol, mineral oils, cleaning agents, diluted acids and alkalis, etc. DUROPUR coatings have excellent adhesion, are non-yellowing, extremely weatherproof and show very good gloss retention, lightfastness and chalking resistance.
Further information
381 DUROFIS
2K-PUR sealer DD-381
DUROFIS is a 2-component sealing lacquer on a polyurethane resin basis. DUROFIS meets the highest demands for chemical and mechanical resistance. DUROFIS produces abrasion-resistant, tough elastic coatings with excellent resistance to solvents, petrol, mineral oil, detergents, diluted acids and alkalis, etc. DUROFIS coatings have excellent adhesion, are non-yellowing, extremely weatherproof and show very good gloss retention, lightfastness and chalking resistance.
Further information

3.4    Primers

365 BLENDA®-XIM
acrylic impregnatiing primer WV-365
BLENDA®-XIM is a water-dilutable, low-odour and transparent impregnation primer for exterior and interior use. BLENDA®-XIM has a high penetration capacity and increases the adhesion and durability of a subsequent coat of paint. BLENDA®-XIM has a water-repellent effect, is highly permeable to water vapor and prevents dust formation and the penetration of impurities.
Further information
460 ELOXIM
silicate impregnation
Further information
362 BLENDA®-POX
2K epoxy sealer WV-362
BLENDA®-POX 2K epoxy sealer WV-362 is a water-dilutable, low-odour and transparent 2-component epoxy primer for exterior and interior use. BLENDA®-POX has a high penetration capacity and increases the adhesion and durability of a subsequent coat of paint. BLENDA®-POX has a water-repellent effect, is highly permeable to water vapor and prevents dust formation and the penetration of impurities. For exterior use, a weather-resistant and pigmented top coat (for example BLENDA®-FLOR) must be applied.
Further information
532 BLENDA®-POX
2K epoxy all-primer WV-532
BLENDA®-POX is a water-dilutable and extremely adhesive and hard-wearing 2-component epoxy primer for high-quality renovation work in exterior and interior areas. It results in very resistant as well as filling and well running adhesive coatings with high resistance as well as excellent covering power and edge coverage. BLENDA®-POX 2K epoxy all-primer WV-532 shows excellent adhesion properties on old coatings as well as very good direct adhesion on various materials. Thanks to the use of anti-rust inhibitors, light corrosion protection on iron and steel is also guaranteed.
Further information
324 DUROPUR
1K-PUR bonding agent FH-1000
DUROPUR is a moisture-curing 1-component adhesion promoter based on polyurethane resin. The access of air humidity during application creates compounds with which the polyurethane resin can cross-link. It meets the highest requirements in terms of chemical and mechanical resistance. DUROPUR produces hard, abrasion-resistant yet elastic coatings with excellent resistance to solvents, petrol, mineral oils, cleaning agents, diluted acids and alkalis, etc.
Further information
465 EPOXIM
2K epoxy sealer EP-465
EPOXIM is a 2-component epoxy impregnation for priming or sealing of concrete, cement and asphalt coatings. EPOXIM has a high penetration capacity and increases the adhesion and durability of a subsequent coat of paint. EPOXIM has a water-repellent effect, is highly permeable to water vapor and prevents dust formation and the penetration of impurities.
Further information
356 EPOXIT
2K epoxy deep penetrating primer
Suitable for exterior and interior use on absorbent and mineral surfaces. Thanks to the special binder and solvent combination, EPOXIT has an enormously high penetration depth and therefore also an excellent hardening effect. EPOXIT is suitable as an extremely adhesive primer for a subsequent and durable paint or coating system or as the sole impregnating agent against dust formation and the penetration of contaminants. EPOXIT is well water repellent and shows very good resistance to a wide range of oils, solvents, various chemicals, detergents, etc.
Further information
354 BRICAPOX
2K epoxy primer DS EP-354
BRICAPOX is a 2-component epoxy primer for highest demands on adhesion, corrosion and chemical resistance. BRICAPOX has excellent adhesion to iron, steel, light metals, galvanized surfaces, certain plastics, polyester, etc. BRICAPOX is quick-drying, filling and very resistant to mechanical stress. The coatings are resistant to water, oils, solvents, petrol, etc. and are ideal for underwater use. The excellent rust protection effect is based on modified zinc phosphates and is intensified by the addition of special rust inhibitors.
Further information
315 EPOTEX
2K epoxy oil and moisture barrier
EPOTEX is a solvent-free and pore-closing 2-component epoxy resin primer. EPOTEX displaces water from the capillary structure in the surface zone of the concrete and acts as a barrier against rising oils and moisture.
Further information
314 EPOSAN
2K epoxy moisture barrier
EPOSAN is a solvent-free and pore-closing 2-component epoxy resin primer. EPOSAN displaces water from the capillary structure in the surface zone of the concrete and acts as a barrier against rising damp.
Further information

3.5    Auxiliary materials

3800 DUROSAFE
textured roll
Textured roller for «DUROSAFE» Slip Stop FH-9000.
Further information
842 CREASAFE
slip stop
CREASAFE slip stop is an additive which can be added to the final coat of paint systems and transparent sealers. As a result, CREASAFE treated underlays exhibit increased slip resistance without any major restrictions in terms of cleanability or susceptibility to dirt. In contrast to quartz-based systems, the addition of CREASAFE results in virtually no change in color.
Further information
840 CREASTONE
quartz sand
CREASTONE Natur is loosely and evenly sprinkled into the intermediate coat for filling coatings or as an anti-slip coating. Suitable for floor surfaces with medium to high loads in exterior and interior areas. CREACOLOR Deco-Quartz consists of natural quartz sand and is used as a decorative wall, plinth or anti-slip floor coating for exterior and interior use.
Further information
840 CREASTONE
quartz sand
CREASTONE Natur is loosely and evenly sprinkled into the intermediate coat for filling coatings or as an anti-slip coating. Suitable for floor surfaces with medium to high loads in exterior and interior areas. CREACOLOR Deco-Quartz consists of natural quartz sand and is used as a decorative wall, plinth or anti-slip floor coating for exterior and interior use.
Further information
841 CREAPERL
glass textured beads
CREAPERL are high-quality glass beads with a high degree of roundness, clarity and reflection. They are sprinkled into the freshly applied marking or floor paint and thus increase night visibility and slip resistance.
Further information
843 CREATHIX
adjusting devices
CREATHIX adjusting devices is used wherever thickening of solvent-free coating materials is necessary – such as EPODIT, DURODIT, EPOSAN or EPOTEX.
Further information
207 CREAFLOC
deco-acrylic flakes G-3
CREAFLOC are single-coloured acrylic flakes for the decorative design of floor and wall paints and coatings. They conceal the smaller unevennesses that are often disturbing in plain-coloured coatings and the insensitivity to dirt is increased. The flakes, single-coloured or in colour combinations, are usually strewn evenly by hand into the wet final coating with a coverage of 20–40 %. With a final sealing lacquer the flakes then receive the strength and the surface the appropriate resistance.
Further information
846 CREAFIBRE
fibre filler
Additive for water or solvent based products for bridging small cracks. Add 300g per 20 kg bucket.
Further information